Integra TUN-3.7 - Manual (Page 9)

9
Getting to Know the TUN-3.7 —Continued
A XM (requires C-HDXM tuner board)
Lights up if the installed tuner board supports XM
Satellite Radio. When XM is selected, a box appears
around it.
B FM
Lights up if the installed tuner board supports FM.
When FM is selected, a box appears around it.
C AM
Lights up if the installed tuner board supports AM.
When AM is selected, a box appears around it.
D HD Radio
Lights up if the installed tuner board supports HD
Radio technology. When the HD Radio band is
selected, a box appears around it.
E RDS (requires C-HDXM tuner board)
Lights up when tuned to an FM radio station that
supports RDS (Radio Data System).
F STEREO
Lights up when radio reception is in stereo.
The indicator does not light up if the installed tuner
board supports HD Radio technology.
G MONO
Lights up when radio reception is in mono.
The indicator does not light up if the installed tuner
board supports HD Radio technology.
H HD Radio indicators
(These indicators function only when a tuner board
that supports HD Radio technology, such as a C-
HDXM, has been installed.)
DIGITAL: Lights up when a digital HD Radio
transmission is being received.
ANALOG: Lights up when an analog HD Radio
transmission is being received.
I HD TUNED
The TUNED indicator lights up when prop-
erly tuned to a radio station. During Auto Tuning,
the Tuning Arrows flash. When tuned to an HD
Radio station, the indicator appears as
HD TUNED .
J AUTO
Lights up when Auto Tuning mode is selected.
K MEMORY
Lights up when presetting radio stations.
L Message area
Various information is displayed here, including
radio preset numbers, tuning frequency, and so on.
With this function, you can adjust the brightness of the
display.
Display
1 2 3 4 6 5 7 8 9 J K
L
Setting the Display Brightness
Press the [Dimmer] button
repeatedly to select: dim, dim-
mer, or normal brightness.
Alternatively, you can use the [Dim-
mer] button on the tuner.
Remote controller