Inova OnTimeTM User Manual
Page 12
Inova OnTime Digital Clock Owner's Manual
All claims based on information publicly available at time of printing. All other product or service names mentioned in this document may be
trademarks of the companies with which they are associated.
© 2007 Inova Solutions. | All rights reserved. 6.12.2007 | page 7
5. Securely attach the mounting unit to the wall using fasteners suitable for the wall surface.
6. Lift the clock into place and insert the data cable into the jack located on the back of the
clock.
7. Position the keyhole slots located on the rear of the clock over the mounting tabs on the
clock mount.
8. Pull the clock slightly downwards until the unit is seated.
9. Repeat for the second clock if two clocks are being installed back-to-back.