Inova OnTimeTM - Manual (Page 20)

Inova OnTime Digital Clock Owner's Manual
All claims based on information publicly available at time of printing. All other product or service names mentioned in this document may be
trademarks of the companies with which they are associated. © 2007 Inova Solutions. | All rights reserved. 6.12.2007 | page 15
The clock’s password prompt appears:
iclock password:
5. Enter the clock’s password (the default is timely).
The clock’s telnet prompt appears:
iclock />
You are now ready to set configuration using the telnet commands.
Accessing Help Commands
For help with a specific telnet command, at the prompt, you have two options:
help or ? along with the command.
For example, to see help for the display option:
display ? or help display
Assigning an IP Address
There are two options for assigning an IP Address to each OnTime Digital Clock:
• DHCP Address [Factory Default]
• Static IP Address
Setting the DHCP Address
The factory default is DHCP. When connected to the network, the clock will request DHCP
service. The letters DHCP may be displayed briefly on the screen. If the DHCP message
remains in place, then DHCP service is not available.