Connecting the antenna, Connecting audio components – Insignia NS-AV511 User Manual

Page 11

Advertising
background image

7

Insignia NS-AV511 Surround Sound Receiver

www.insigniaproducts.com

Connecting the antenna

This section explains how to connect the supplied
indoor FM antenna and AM loop antenna.
The receiver won’t pick up any radio signals without
any antenna connected, so you must connect the
antenna to use the tuner.
AM Antenna connection

FM Antenna connection

To connect the antennas:

1 Connect the FM antenna to your receiver.

2 Connect the AM loop antenna to the receiver.

Connecting audio components

HDMI cable

Other cables

Note

If you are using an indoor FM antenna, change the
position of the antenna until you get the best
reception of your favorite FM stations.

To improve reception, use a 75

Ω

outdoor antenna

instead of an indoor antenna. Disconnect the
indoor antenna before replacing it with an outdoor
antenna.

Tip

Once your receiver is ready for use, you need to tune
into a radio station and position the antenna to
achieve the best possible reception.
If you cannot achieve good reception with the
supplied indoor FM antenna, try a commercially
available outdoor FM antenna instead.

AM loop antenna (supplied)

Assembling the AM loop antenna

Push

Insert wire

Release

Thumbtacks

Indoor FM antenna (supplied)

Insert the plug
fully into the jack

FM 75 Ohm

Notes

Place the AM loop antenna as far as possible from the
receiver, television, speaker cords, and the AC cord.
Change the position of the antenna until you get the
best reception of your favorite AM stations.
To improve reception, use an outdoor AM antenna
instead of a loop AM antenna. Disconnect the indoor
antenna before replacing it with an outdoor antenna.

Notes

Before making any AV connections, read the
manuals supplied with your AV components.

Don’t connect the power cord until you’ve
completed and double-checked all AV
connections.

Push plugs in all the way to make good
connections (loose connections can cause noise
or malfunctions).

To prevent interference, keep audio and video
cables away from power cords and speaker
cables.

Receiver

TV or projector

Blu-ray disc/DVD player

Game console

TV or projector

Receiver

Blu-ray disc/DVD player

Game console

Video

Audio

NS-AV511_11-0201_MAN_.book Page 7 Wednesday, April 13, 2011 9:31 AM

Advertising