Back, Remote control, Back remote control – Insignia NS-AV511 User Manual

Page 8

Advertising
background image

4

Insignia NS-AV511 Surround Sound Receiver

www.insigniaproducts.com

Back

Remote control

#

Description

Function

1

DIGITAL IN jacks

Plug the optical digital cable from a game (1) or
TV/CD (2) into the upper jacks, or the coaxial
digital cable from a BD/DVD into the lower jack.

2

HDMI jacks

Plug the HDMI signal input cable from a GAME
(IN4), CBL/SAT (IN3), VCR/DVR (IN2), BD/DVD
(IN1).
Plug the HDMI output signal cable to a TV or
monitor into the OUT jack.

3

ANTENNA connectors

Connect a 75 ohm FM antenna to the coaxial
connector or an AM loop antenna to the wire
connectors.

4

FRONT SPEAKERS
SURROUND SPEAKERS
CENTER SPEAKER

Connect the front speakers to these jacks.
Connect the left and right surround speakers and
the center speaker to these connectors. If you use
the RF-RBCARD to connect your surround speakers,
do not connect them here.

5

AC power cord

Plug this cord into an AC power outlet.

6

COMPONENT video jacks

Plug the cables from a component video source
into the #1 (BD/DVD) or #2 (CBL/SAT) jacks.
Plug the cables to a component video monitor into
the OUT jacks.
The jacks are color coded (red, green, and blue) to
correspond to the cable connectors.

7

Composite Video and
Audio L/R jacks

Plug the composite video and audio L/R output
cables from the indicated devices into these jacks.
For video recording, plug the composite video and
audio L/R input cables to a VCR or DVR into the
OUT jacks

8

MONITOR OUT V (Video)

Connect this jack to a TV monitor.

9

SUBWOOFER

Connect the subwoofer to this jack.

Item Description

Function

1

ON/STANDBY button

Press to turn the power on to your receiver.
Press again to go to standby mode.

2

Remote mode input selector
buttons

Press to directly select your receiver input
source.

3

ENTER

/

/

/

TUNING+/–

Press the arrow keys to navigate through the
on-screen menus. Press ENTER to confirm a
selection or setting.
In tuning mode, press to tune to the next
(TUNING+) or previous (TUNING–) station.

4

SETUP button

Press to open the on-screen menus.

5

LISTENING MODE buttons

Press to select the listening mode you want.
See “Using the listening modes” on page 18
for additional information.

NS-AV511_11-0201_MAN_.book Page 4 Wednesday, April 13, 2011 9:31 AM

Advertising