Setting speaker distance (sp distance menu), Setting the level calibration (level cal menu) – Insignia NS-AV511 User Manual

Page 19

Advertising
background image

15

Insignia NS-AV511 Surround Sound Receiver

www.insigniaproducts.com

See “Using on-screen setup menus” on page 20 for
information on accessing and using the menus.

Using the Double Bass setting (Double Bass submenu of
Sp Config menu)

Lets you boost bass output by feeding bass sounds
from the front left, right, and center channels to the
subwoofer. Optional settings are On and Off.

Setting wireless (This setting appears only when
RF-RBCARD is inserted)

This menu is used if you are connecting your home
theater front left/right, surround, or subwoofer
channels using Rocketboost wireless (see
“Rocketboost Setup” on page 11 for more details
about Rocketboost).
The On menu option results in the wired and
wireless channels in your home theater to be
synchronized in time.
If any of these channels in your home theater are
connected with Rocketboost wireless, then set
those channels to On. For example, if you are using
Rocketboost for wireless surround sound and
wireless subwoofer in your home theater, then set
Wireless Sur and Wireless SW to On.
If you are using Rocketboost Wireless to send the
front left/right speaker audio signals to
Rocketboost receivers in other rooms of your
house, and not for your left/right home theater
speakers, then set Wireless Front to Off.

Setting speaker distance (Sp Distance menu)

Lets you specify the distance from each speaker to
the listening position so that the sound from each
speaker arrives at the listener’s ears as the sound
designer intended.

See “Using on-screen setup menus” on page 20 for
information on accessing and using the menus.

Setting the level calibration (Level Cal menu)

Lets you adjust the level of each speaker with the
built-in test tone so that the volume of each
speaker is the same at the listening position.
See “Using on-screen setup menus” on page 20 for
information on accessing and using the menus.

Speaker cone diameter

Recommended
Crossover Frequency

Over 8 in. (20 cm)

40/50/60 Hz

6-1/2 to 8 in. (16 to 20 cm)

70 Hz, 80 Hz, 90 Hz

5-1/4 to 6-1/2 in. (13 to 16 cm) 100 Hz

3-1/2 to 5-1/4 in. (9 to 13 cm)

120 Hz

Under 3-1/2 in. (9 cm)

150/200 Hz

Notes

For a more accurate setting, look up your
speaker’s specifications.

Choose a higher crossover frequency if you
want more sound from your subwoofer.

Note

This function can only be set if the Subwoofer
setting is Yes, and the Front setting is Large.

Option

Configuration

Wireless Front

On or Off

Wireless Sur

On or Off

Wireless SW

On or Off

Option

Configuration

Unit

Feet (default)–Distances can be set from 1 to 30
feet, in one foot increments.
Meters–Distances can be set from 0.3 to 9.0 meters,
in 0.3 meter increments.

Left, Center, Right,
Surround Right, Surround
Left, Subwoofer

Specify the distance from each speaker to your
listening position.

Notes

The speaker distance setting is disabled while
headphones are connected, or when Audio TV
OUT
is set to On.

Speakers that you set to No or None in the
speaker configuration (Sp Config menu) cannot
be selected.

The Center, Right, and Subwoofer distances can
be set up to 5 ft. (1.5 m) more or less than the
Left distance. For example, if the Left distance is
set to 20 ft. (6 m), the Center, Right, and
Subwoofer distances can be set between 15 and
25 ft. (4.5 and 7.5 m).

The Surround distances can be set up to 5 ft.
(1.5 m) more or 15 ft. (4.5 m) less than the Left
distance. For example, if the Left distance is set
to 20 ft. (6 m), the SurrRight and SurrLeft
distances can be set between 5 and 25 ft. (1.5
and 7.5 m).

Option

Configuration

Left, Center, Right,
Surround Right,
Surround Left

-12 dB to 0 dB to +12 dB, in 1 dB steps.

Subwoofer

-15 dB to 0 dB to +12 dB, in 1 dB steps.

Notes

The speaker level setting is disabled while
headphones are connected, or the receiver is
muted, or the Audio TV OUT setting is set to ON.

Speakers that you set to No or None in the
speaker configuration (Sp Config menu) cannot
be selected.

The center speaker and subwoofer level settings
made by using AUDIO are saved here as the
default settings.

Tip

If you’re using a handheld sound level meter, adjust
the level of each speaker so that it reads 75 dB SPL at
the listening position, measured with C-weighting
and slow reading.

NS-AV511_11-0201_MAN_.book Page 15 Wednesday, April 13, 2011 9:31 AM

Advertising