IntraServer Technology 5232E - Manual (Page 10)

10
5. Locate a free PCI expansion slot (small white connector on the system’s motherboard)
and remove the screw and metal bracket for the selected slot. Be certain not to install the
adapter in an ISA or EISA slot, which are longer than the PCI slots
6. Install the adapter in the selected slot. The module should fit without forcing, and should
line up with the I/O bulkhead. Be certain that the adapter is fully seated in the slot
7. Replace the retaining screw removed in step 5
8. Connect to your Ethernet HUB using uncrossed Twisted Pair cable.
After installation, re-assemble the system enclosure, and proceed with Software installation.