Redial – Inter-Tel CS-5400 User Manual

Page 249

Advertising
background image

System Features

INTER-TEL

®

CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.1 – August 2005

Redial

Page 231

The interaction of the House Phone Mode flag with the programmed Speed Dial number and
system feature is shown in Table 31.

Redial

The Redial feature can store one phone number in Redial memory of the endpoint. If the end-
point user reaches a busy number, is disconnected, or receives no answer, the number can be
readily redialed. To redial, the user lifts the handset and presses the

button or enters the

Redial feature code (380). A trunk access code is automatically entered and the phone number
is redialed.

If redialing is activated while still connected to an outside call, the connection is dropped and
the trunk is reseized before the number is dialed.

Only one phone number can be stored in an endpoint’s Redial memory at a time. This number
can be stored in either of the following ways, depending on endpoint programming:

Last Number Saved: The desired number is manually stored in Redial memory by the
station user. Dialing other numbers does not change the stored number. It only changes
when a new number is stored.

Last Number Dialed: The last number manually dialed or speed dialed is automati-
cally stored. It changes every time the user dials a phone number. Last Number Dialed
is the default state of the Redial feature.

The Last Number Saved and Last Number Dialed features work differently depending on the
station status when it is used, as shown in Individual endpoint programming determines the
mode of the Redial feature, either Last Number Dialed or Last Number Saved. The Redial fea-
ture code (380) performs the Redial function and is programmed under the

button.

Table 31.

House Phone Mode Interactions

SITUATION

DAY/NIGHT

NUMBER

NORMAL MODE

RESTRICTED MODE

House phone user
lifts the handset

Complete exten-
sion

Dials the extension
number

Dials the extension num-
ber

House phone user
lifts the handset

Blank

User receives intercom
dial tone

User receives reorder
tone

House phone user
lifts the handset

Incomplete
extension num-
ber

System dials the par-
tial number and waits
for further digits

System dials partial num-
ber, then times out after
Long Interdigit timer
expires, and sends reor-
der tones

House phone is con-
nected to ARS, and
the user performs a
hookflash

Dials an outside
number using
ARS

System inserts a hook-
flash in the number
and registers end-of-
dialing

System restarts ARS by
clearing the number and
returns outside dial tone
to the user

House phone is con-
nected to an outside
call, and the user
performs a hookflash

N/A

The call is placed on
consultation hold, and
the user hears inter-
com dial tone

The trunk dials a hook-
flash, and toll restriction
is restarted

Party the house
phone is connected
to hangs up before
the house phone
user

N/A

User receives intercom
dial tone and can use
another feature code
or dial a number

System redials the house
phone digits after the SL
Wait for Disconnect timer
expires

REDIAL

REDIAL

Advertising
This manual is related to the following products: