Invacare Compressor - Manual (Page 27)

SECTION 5—COMPRESSOR OPERATION
Part No 1100873 27 HomeFill ® Compressor
ƽ WARNING
The fillport cover on the connector fillport and the cylinder
fillport MUST be replaced after filling and whenever not in use.
If either of the fillport covers are missing contact your healthcare
provider before using.
6. Place the fillport covers onto the connector fillport and
cylinder fillport.
NOTE: When using the post valve type cylinder, attach an oxygen
regulator per manufacturers instructions.
7. Examine the cylinder gauge to ensure cylinder is full (needle
pointing into GREEN area). If the cylinder is not full, perform
the following:
A. Repeat Connecting the Cylinder to the Compressor on
page 23.
B. If cylinder is not full after second attempt to fill, contact
the provider.
FIGURE 5.4 Fillport Covers
Cylinder
Fillport
Cover
Connector
Fillport Cover