IBM CISCO R2E2 - Manual (Page 50)

Chapter 4: Configuring the technology pack
46 IBM Tivoli Netcool/Proviso Cisco IP Telephony 2.4.0.0 Technology Pack
— An X Window server on the DataMart server.
Note: (Tivoli Netcool/Proviso pre-v4.4.3) If there is no graphics card on the DataMart server, you can
install the Xvfb virtual frame buffer package to provide X Window services, as described in the IBM Tivoli
Netcool/Proviso Installation Guide .
— Access to the SilverStream server.
— Access to the DataChannel server.
• Have completed the following tasks:
— Reviewed the release notes for the current technology pack.
Important: Release notes contain important information you need to consider before installing a technology pack.
They also contain information on specific patches that need to be installed before you configure a technology pack.
— Installed the current version of the Tivoli Netcool/Proviso components, as described in the IBM Tivoli
Netcool/Proviso Installation Guide.
— Installed the MIB-II Technology Pack.
Note: The MIB-II Technology Pack is a stand-alone technology pack that is contained in its own jar file.
— Installed the Cisco IP Telephony Technology Pack.
Note: Installation instructions for a technology pack can be found in the Appendices of the IBM Tivoli
Netcool/Proviso Installation Guide (covers core and technology packs).
Upgrade instructions for a technology pack can be found in Chapter 3 of the IBM Tivoli Netcool/Proviso
Upgrade Guide (covers core and technology packs).
Localization is done automatically during installation of the technology pack.
— Configured at least one DataChannel.
— Configured a UBA bulk collector subchannel.
— Configured an SNMP collector subchannel.
— Created a user account on the server where the ProvisoCUCM application is installed, so that the CUCM
can FTP the CDR/CMR data stream back to the ProvisoCUCM application.
Note: This technology pack contains a Java application, ProvisoCUCM, that sends data requests to CUCM
servers. The ProvisoCUCM application requires the Java 2 Enterprise Edition (JRE 1.5 J2EE).
Starting with the Cisco IP Telephony 2.4.0.0 Technology Pack, the ProvisoCUCM application supports multiple
Perfmon host collection for a single instance of the ProvisoCUCM application.
Configure the technology pack
To configure the Cisco IP Telephony Technology Pack, follow these steps:
1. Load the DataMart environment.
To load the shell with the DataMart environment, follow these steps:
1-a. Log in to the DataMart server as pvuser.
1-b. Change your working directory to the DataMart home directory (
/opt/datamart , by default), using
the following command:
cd /opt/datamart