Service man menu, Select the language – Icom MR-1000TTM User Manual
Page 36
11
32
SERVICE MAN MENU
■ Service man menu
To open the “SERVICE MAN” menu.
Push [MENU]/[
] several times to show the
“SERVICE MAN” menu.
■ Select the language
Menu screens can be displayed in 2 different
languages.
Selectable languages; ENGLISH,
(CHINESE)
After opening the “SERVICE MAN” menu;
q Push [Ù] to show the present language.
w Push [Ω ≈] to select desired language, then push
[Ú] to continue the setting.
e Push [MENU]/[
] to exit the “SERVICE MAN”
menu.
D TIMING ADJ.
• Corrects the distance.
D HDG ADJ.
• Adjusts the electronic heading line adjustment.
D SPD ADJ.
• Enter the pulse rate of the speed sensor.
D RANGE
•
1
⁄
8
,
1
⁄
4
,
1
⁄
2
,
3
⁄
4
, 1, 1.5, 2, 3, 4, 6, 8, 12, 16, 24, 32, 36,
48* : Choose the selectable screen range.
*MR-1000TII only
D SETUP MEMORY
• The present setting value is displayed by pushing [≈],
then select the desired item from “RECALL” and
“SAVE” using with [Ú].
q Push [≈] to display “RECALL” and “SAVE”.
w Push [Щ Ъ] to select “RECALL” or “SAVE”.
e Push [≈].
• “SURE ?” is displayed.
r Push [≈] to perform.
t Push [Ω] to cancel.
• When recall is performed without saving a setup, it
will become an initial value at the time of factory
shipments.
D Other readouts
• OUTPUT VOLTAGE
: Shows the voltage level for the
scanner unit from the display unit.
• HV (High voltage) : Shows the voltage level in the
high-voltage unit in the scanner
unit.
• MONITOR
: Shows the voltage level for
checking the receiver unit opera-
tion.
• HEATER
: Shows the heater current.
• MG
: Shows the current level for the
Magnetron.
• TX TIME
: Shows the total transmitted time.
SERVICE MAN
SPD ADJ.
HDG ADJ.
0.0
˚
HV
SETUP MEMORY RECALL
RANGE
2 4 0 0 0
MONITOR
HEATER
5 7 3 1 . 0 H
TX TIME
3 0 . 0
OUTPUT
ENGLISH
VOLTAGE
SAVE
MG
3 4 0
7 5
3 . 0
0 . 5 5
TIMING ADJ.
1/8
3/4
2
6
1/4
1
3
8
1/2
1.5
4
12
16
24
32
36
48
CAUTION: The SERVICE MAN MENU is available
for service purposes only. DO NOT change any set-
ting on the menu, otherwise the equipment may not
operate at it’s original performance.
MR-1000R2_T2.qxd 04.2.24 10:22 Page 32