Mode selection, Quick band change function – Icom I706MKTMG User Manual
Page 22
19
3
FREQUENCY SETTING
• Quick band change function
The quick band change function automatically stores
the last frequency and mode used for each band in a
band stacking register. This is convenient for contest
operation, etc. The tables below show the quick band
change default settings for each band.
➀
Select S3.
• Push [DISPLAY] when M or G is displayed.
• Push [MENU] twice to select S3.
➁
Push [F-1]–[F-3] to select a band stacking register.
• The default settings for [F-1]–[F-3] are 7, 144 and 430
MHz bands, respectively.
➂
To change the settings for [F-1]–[F-3] from their
defaults, push [F-1]–[F-3] for 1 sec. one or more
times to until the desired band appears in the dis-
play above the corresponding switch.
• The last-used frequency and mode for the selected
band are displayed.
*General refers to the general coverage receiver (GEN in
the display) and the range varies according to version.
** 1.83000 MHz
for Italy version (#10,#20).
■ Mode selection
The following modes are available in the IC-
706MKIIG:
SSB (LSB/USB), CW, CW-å (CW reverse), FM,
WFM (receive only), AM, RTTY and åRTTY (RTTY
reverse).
To select the desired mode of operation push
[MODE] one or more times, then push [MODE] for 2
sec., if necessary. See the diagram at right for the
order of selection.
• The selected mode is indicated in the function display.
Note: If a desired mode cannot be selected, it may be
hidden using Initial Set mode (p. 50).
OPERATING MODE SELECTION
MODE
Push
momentarily
MODE
Push
for 2 sec.
USB
LSB
CW
CWå
RTTY
åRTTY
FM
WFM
AM
BAND
FREQUENCY
MODE
18 MHz
18.15000 MHz
USB
21 MHz
21.30000 MHz
USB
24 MHz
24.95000 MHz
USB
28 MHz
28.60000 MHz
USB
50 MHz
50.10000 MHz
USB
144 MHz
145.00000 MHz
FM
BAND
FREQUENCY
MODE
1.9 MHz
1.91000 MHz
**
CW
3.5 MHz
3.56000 MHz
LSB
7 MHz
7.06000 MHz
LSB
10 MHz
10.13000 MHz
CW
14 MHz
14.10000 MHz
USB
General*
15.10000 MHz
USB
BLANK
CH
VFO A
S1
5
3
7
9
20
40
60dB
USB
S3
7
144 430
Display shows the
default bands for the
quick band change
function.
P
O
5
10
BLANK
CH
VFO A
S1
5
3
7
9
20
40
60dB
USB
S3
7
GEN 144
Display shows [F-2]
has been changed from
its default of the 50 MHz
band to the general
receiver band.
P
O
5
10
430 MHz
433.00000 MHz
FM