Invacare Auriga10 - Manual (Page 25)

25
6.1.1 Seat Lifter Button
•
Press the button to activate the Seat Lifter (if installed). The LED above the button lights up.
•
Raise or lower the seat using the throttle lever.
•
Press the button once again to de-activate the Seat Lifter. The throttle lever reverts back to
driving mode.
NOTE
If the Seat Lifter is not lowered entirely, then the speed of the scooter is automatically reduced to
lower the risk of tipping over. This is indicated by the LED just above the "Reduced Speed Mode"
button flashing. Lower the Lifter completely to restore speed to it's normal level. The LED will go
out.
6.1.2 Status display
NOTE
The leftmost diode of the battery charge display serves as an error message display (status
display). For an explanation of the Error Codes please see chapter "Error Codes and Diagnostic
Codes" on page "30".