Ingersoll-Rand 4578217 - Manual (Page 3)

3
SERVICING THE TOOL
Lubrication
Ingersoll--Rand No. 10 Ingersoll--Rand No. 68
Ingersoll--Rand No. 50
Always use an air line lubricator with these tools.
We recommend the following Filter--Regulator--Lubricator
Unit (FRL):
Inside USA use FRL unit # C11--03--G00
Outside USA use FRL unit # C26--C4--A29
After each two hours of operation, if an air line lubricator is
not used, inject 1/2 to 1 cc of Ingersoll--Rand No. 10 Oil into
the Air Inlet.
(Dwg. TPD905--2)
F L
R
Main Line(s) Inner Ø
to be 3X Size of
Air Tool’s Inlet Ø
To Air
System
To Air
Tool
Lubricator
Emergency
Shut--Off
Valve
Regulator Filter
Compressor
FRL
Drain Regularly
Branch Line(s) Inner Ø
to be 2X Size of
Air Tool’s Inlet Ø
SPECIFICATIONS
Model Speed Collet
H Sound Level
dB(A)
z Vibration Level
rpm inches mm Pressure Power m/s 2
335SC4 35,000 1/4I 6 82.1 -------- 3.7
330SC4 30,000 1/4I 6 82.8 -------- 2.1
325SC4 25,000 1/4I 6 81.2 -------- 1.8
325XC4
(3I Extension)
25,000 1/4I 6 82.2 -------- 2.4
330XC4
(3I Extension)
30,000 1/4I 6 82.6 -------- 1.9
H Tested in accordance with PNEUROP PN8NTC1.2
z Tested in accordance with ISO8662