Intel Fireface 800 - Manual (Page 84)

84 User's Guide Fireface 800 © RME
DA, Line Out 1-8, rear
• Resolution: 24 bit
• Dynamic range (DR): 116 dB, 119 dBA @ 44.1 kHz (unmuted)
• Frequency response @ 44.1 kHz, -0.1 dB: 1 Hz – 20.1 kHz
• Frequency response @ 96 kHz, -0.5 dB: 1 Hz – 43.5 kHz
• Frequency response @ 192 kHz, -1 dB: 1 Hz - 70 kHz
• THD: -103 dB, < 0.0007 %
• THD+N: -100 dB, < 0.001 %
• Channel separation: > 110 dB
• Maximum output level: +19 dBu
• Output: 6.3 mm TRS jack, servo-balanced
• Output impedance: 75 Ohm
• Output level switchable Hi Gain, +4 dBu, -10 dBV
• Output level at 0 dBFS @ Hi Gain: +19 dBu
• Output level at 0 dBFS @ +4 dBu: +13 dBu
• Output level at 0 dBFS @ -10 dBV: +2 dBV
DA - Stereo Monitor Output (Phones)
• as DA, but:
• Output: 6.3 mm TRS jack, unbalanced (stereo)
• Maximum output level at 0 dBFS: +17 dBu
• Output impedance: 30 Ohm
34.2 MIDI
• 1 x MIDI I/O via 5-pin DIN jacks
• Galvanically isolated by optocoupled input
• Hi-speed mode: Jitter and response time typically below 1 ms
• Separate 128 byte FIFOs for input and output
34.3 Digital
• Clocks: Internal, ADAT In, SPDIF In, word clock in. Optional LTC/Video in
• Low Jitter Design: < 1 ns in PLL mode, all inputs
• Internal clock: 800 ps Jitter, Random Spread Spectrum
• Jitter suppression of external clocks: > 30 dB (2.4 kHz)
• Effective clock jitter influence on AD and DA conversion: near zero
• PLL ensures zero dropout, even at more than 100 ns jitter
• Digital Bitclock PLL for trouble-free varispeed ADAT operation
• Supported sample rates: 28 kHz up to 200 kHz