Insignia 450TX - Manual (Page 15)

great distance. Normal 2D
information is displayed on the
right side of the display. Pressing
VIEW again will toggle the display
back to the 2D view.
When using the standard (Tri-
beam) transducer, with the
optional speed/temp sensor
connected, the VIEW button
toggles the display between the
full-screen 2D View, the Chart View
and the Large Digital Readout
View.
The Chart View, shows only the
digital depth readout, leaving more
screen area for fish location and
bottom depiction.
If a Wide Side transducer is being
used (see Using Alternative
Transducers), the VIEW button is
used to select one of four views
available: Both, Left, Right, and
Down. You can select “side”
simulator to view this presentation
even if a Wide Side transducer is
not connected.
Menu. MENU displays a menu on-
screen for adjustment. In normal
operation, pressing MENU
repeatedly cycles through all
available menus. A menu remains
on-screen for several seconds, and
can be adjusted by using the
ARROW keys. If no adjustment is
made in the allotted time, the
13
USING THE 450TX
CONTROL FUNCTIONS
m
2d View
Large Digit View
Chart View
530977-1r11015E 11/6/01 12:09 PM Page 13