Insignia 450TX - Manual (Page 22)

20
Fish Alarm. The Fish Alarm alerts you to the
presence of fish, or other targets not
connected to the bottom. The Fish Alarm has
three different settings that correspond to the
three different size fish symbols shown on-
screen.
The default setting is “OFF.” With the “Large
fish only” setting, the 450TX alarms on only
those targets that are represented by the large
fish symbols. The 450TX can be set to alarm on
only large and medium fish, or set to alarm on
all fish.
Once the Fish Alarm is enabled, the 450TX
emits an audible beep when the selected size
fish symbol appears on-screen.
Fish Alarm settings are remembered when the unit
is powered off.
Triplog. Triplog provides a running log of
information based on input from the Temp/Speed
sensor.
Since Triplog requires information from the
Temp/Speed sensor to operate, if this sensor
is not detected by the 450TX, the Triplog
menu will not appear as an option.
Triplog provides four pieces of information: the total time elapsed since
power-up or reset, the distance traveled since the 450TX was powered up
or reset, the average speed, and the input voltage from your boat’s
electrical system.
USING THE 450TX
MENU FUNCTIONS
530977-1r11015E 11/6/01 12:09 PM Page 20