Listening mode setup – Integra DTR-9.1 User Manual

Page 45

Advertising
background image

45

Listening mode

DTS Film

MPEG Film +Action**/

Theater

Enhance7

Orchestra/

All Ch

+Musical Dimensional

Unplugged/

Stereo

(T-D)

Studio-Mix/

TV Logic/

Parameter

Mono Movie

Subwoofer

Re-EQ (/Academy)

Input Channel
Output Channel
Surround Speakers

Digital Upsampling
Front Effect

Reflect Level

Reverb Level

Room Size

Listening Angle

Center

Front Expander

Virtual Surr Level

Dialog Enhance

Listening Mode Setup

Relationship between listening mode and parameter

The parameters that can be set are different for each listening mode.
*

The surround given here refers to basic surround modes and consists of Dolby Pro Logic, Dolby Digital, DTS, MPEG, etc.

** +Action and +Musical refers to Dolby Digital Action, Dolby Digital Musical, DTS Action, DTS Musical, MPEG Action, MPEG

Musical, Dolby Pro Logic Action, and Dolby Pro Logic Musical.

Virtual Surr Level
This parameter adjusts the virtual surround level. This
can be set from -3 to +3 decibels.

Dialog Enhance
This parameter allows you to adjust the dialog sound
level from the center speaker if it is difficult to hear.

On: Enhances the vocal ranges for the center chan-
nel signal.
Off: Outputs the center channel signal at the regular
level and frequency characteristics.

Listening mode

Direct

Mono

Mono

Stereo

Stereo

Surround*

Surround*

THX

Parameter

(Analog/PCM) (Digital) (Analog/PCM) (Digital) (Analog/PCM)

(Digital)

Cinema

Subwoofer

Re-EQ (/Academy)

Input Channel

Output Channel

Surround Speakers

Digital Upsampling

Front Effect
Reflect Level
Reverb Level
Room Size
Listening Angle
Center
Front Expander
Virtual Surr Level
Dialog Enhance

Center
For systems that have a center speaker, the center
channel signal can be output from the center speaker.
For instance, in systems where the front left and right
speakers are small, use of the center speaker may pro-
vide a better sound space. (If your system uses a center
speaker, be sure to perform the level calibration with
the left and right speakers in the Speaker Setup menu
beforehand.)

On: The center channel signal is output to the cen-
ter speaker.
Off: The center channel signal is output from the
front left and right speakers (Phantom Center).

Front Expander
The front expander function spreads out the sound
from the front speakers for the feeling of a wide sound
space.

On: Select to turn on the front expander function to
simulate a wider sound space.
Off: Select to turn off the front expander function for
a normal sound space.

Advertising