Integra DTR-9.1 - Manual (Page 51)

51
CLEAR
Listening to Radio Broadcasts
ANALO G INPUT
ANALO G INPUT
ANALO G INPUT
ANALO G INPUT
2. Press the Memory button on the front panel.
Flash
Flash
Light
Presetting a radio station
1. Tune into the radio station you desire (see
“Tuning into a radio station” above).
3. Using the or cursor buttons, select a preset
number (from 1 to 40) to assign the station to
be preset.
4. Press the Enter button again to finalize the
procedure.
This programs the radio station as a preset radio sta-
tion.
• Up to 40 stations can be stored in memory as
preset radio stations.
• Using the OSD Menu, you can enter names to
each preset radio station (see page 41).
Selecting a preset radio station
1. Press either the AM or FM input source button.
(or press the TUN button on the remote
controller when in AUDIO mode)
2. Press the and Preset buttons on the front
panel (or the CH+ or CH- buttons on the
remote controller ) to scroll through the preset
radio stations until you reach the one you
want.
Erasing a preset radio station
1. Using the and Preset buttons, select the
preset radio station that you want erase (see
above).
2. Press and hold down the Memory button while
you press the FM Mode button.
This erases the selected preset station.