Integra DTR-9.1 - Manual (Page 49)

49
Enjoying music or videos in the remote
zone
Ex.: When the Zone 2 button is pressed twice
Ex.: When the Zone 2 button and then VIDEO 4 button are
pressed
Controlling the DTR-9.1 from the remote zone
1. Aiming at the remote sensor, press the POWER
ON button on the remote controller.
Note:
Be aware that if you start using the system in the remote
zone (Zone 2) while a recording is going on in the main
zone, the recording is aborted.
2. Press the appropriate input selector button on
the remote controller to select the desired
source.
3. Adjust the volume on the power amplifier to
the desired level.
Controlling the DTR-9.1 without the remote
controller
1. Press the Zone 2 button on the DTR-9.1.
2. Select a source.
After pressing the Zone 2 button, you must press an
input source button within 8 seconds. To select the
same source as that selected for the main zone,
press the Zone 2 button twice in succession. The indi-
cator above the selected input source will light
green. Adjust the volume in the remote zone as de-
sired.
Notes:
• If the Zone 2 button was pressed twice so that the
same source is being played in the main and re-
mote zones, then changing the input source in the
main zone also changes the input source for the re-
mote zone.
• In the remote zone, you can only play the source in
the 2-channel mode. You cannot play the source in
the remote zone in the surround mode.
• If the Rec Out button is pressed in the main room
while someone is using the system in the remote
zone, the Zone 2 function will be deactivated and
the source will turn off in the remote zone.
• The Zone 2 terminal is an analog output. Digital sig-
nals are not output. If no sound is heard from the
selected input source, check if the component is
connected to the analog inputs.
• Please note that some third-party multi-room system
components may not be fully compatible with the
Integra multi-room system components.
• If you are not using the system in the remote zone,
always press the Zone 2 button and then the Off but-
ton to turn the Zone 2 function off.
Off On
Standby/On
Standby
Display DVD Video 1 Video 2 Video 3 Video 4 Video 5 Tape 1 Tape 2 AM FM Phono C D Open/Close
Phones CLEAR
Zone 2 ( ) GRN Rec ( ) RED
Power
Master Volume
DTR-9.1
OPEN/COLSE REC
AUDIO MUTING
DISC TRACK
DVD CD
PH TUN T2 T1
V1
STEREO
1 2 3
6 5 4
7
+ 10 0 ENT
8 9
SURROUND THX DSP
LEVEL + CH SEL Re-EQ
LEVEL – DIMMER
HOME THEATER CONTROLLER RC-418M
LATE NIGHT
DIRECT DSP
V2 V3 V –
POWER
ON
Input
selector
buttons
VOL
Zone 2 Off