Intel D845PESV - Manual (Page 43)

43
4 Using the BIOS Setup Program
The BIOS Setup program can be used to view and change the BIOS settings for the computer. The
BIOS Setup program is accessed by pressing the <F2> key after the Power-On Self-Test (POST)
memory test begins and before the operating system boot begins.
✏
NOTE
The BIOS Setup menus described in this section may not show the latest settings. For the latest
BIOS settings, refer to the Intel
® Desktop Board D845PESV Technical Product Specification or
the Intel World Wide Web site:
http://support.intel.com/support/motherboards/desktop
✏
NOTE
For reference purposes, you should write down the current Setup settings. When you make
changes to the settings, update this record.
✏
NOTE
The Setup menus described in this section apply to the desktop boards with BIOS identifier
SV84510A.86A. Boards with other BIOS identifiers might have differences in some of the
Setup menu screens.
The Setup screen menu bar is shown below.
Maintenance Main Advanced Security Power Boot Exit
Table 8 shows the BIOS Setup program menu bar.
Table 8. BIOS Setup Program Menu Bar
Maintenance Main Advanced Security Power Boot Exit
Clears passwords
and Boot Integrity
Service (BIS)*
credentials, and
configures
extended
configuration
memory settings Allocates
resources for
hardware
components Configures
advanced
features
available
through the
chipset Sets
passwords
and security
features Configures
power
management
features Selects boot
options and
power
supply
controls Saves or
discards
changes to
set program
options
* For information about the BIS, refer to the Intel Web site at:
http://developer.intel.com/design/security/index1.htm