Intel D845PESV - Manual (Page 51)

Using the BIOS Setup Program
51
IDE Configuration Submenu
Maintenance Main Advanced Security Power Boot Exit
PCI Configuration
Boot Configuration
Peripheral Configuration
IDE Configuration
Diskette Configuration
Event Log Configuration
Video Configuration
USB Configuration
Chipset Configuration
This submenu shown in Table 16 is used to configure IDE device options.
Table 16. IDE Configuration Submenu
Feature Options Description
IDE Controller
•
Disabled
•
Primary
•
Secondary
•
Both (default)
Specifies the integrated IDE controller.
Disabled disables the integrated IDE controller.
Primary enables only the primary IDE controller.
Secondary enables only the secondary IDE controller.
Both enables both IDE controllers.
PCI IDE Bus Master
•
Disabled
•
Enabled (default)
Allows for a PCI device to initiate a transaction as a master.
Hard Disk Pre-Delay
•
Disabled (default)
•
3 Seconds
•
6 Seconds
•
9 Seconds
•
12 Seconds
•
15 Seconds
•
21 Seconds
•
30 Seconds
Specifies the hard disk drive pre-delay. Causes the BIOS to
insert a delay before attempting to detect IDE drives in the
system.
Primary IDE Master No options Reports type of connected IDE device. When selected,
displays the Primary IDE Master submenu.
Primary IDE Slave No options Reports type of connected IDE device. When selected,
displays the Primary IDE Slave submenu.
Secondary IDE
Master No options Reports type of connected IDE device. When selected,
displays the Secondary IDE Master submenu.
Secondary IDE Slave No options Reports type of connected IDE device. When selected,
displays the Secondary IDE Slave submenu.