JVC 0803AIMMDWJEM - Manual (Page 33)

30
English
To set group recording mode
You can form a new group (up to 99 groups) easily while
recording using group recording mode.
Press GROUP REC ON/OFF.
• Each time you press the button, group
recording mode turns on and off.
MD GROUP ON: All the tracks recorded at a time will
form a new group. The GROUP indicator
lights up on the display.
MD GROUP OFF: Cancels group recording function. The
GROUP indicator goes off from the
display.
Recording CD onto an MD
—CD-MD Synchronized Recording
Using the CD synchronized recording method, you can start
and stop CD play and MD recording at the same time.
1
Load discs into the 5-CD changer.
• If the current playing source is not “CD,” press CD
6,
then 7 before going to the next step.
• You can make a program (see page 17) or select
Random Play (see page 18) if you want.
On the remote control ONLY:
2
Press DISC UP or DISC DOWN to
select the disc you want to record, then
7
before going to the next step.
3
Insert a recordable MD into the MD loading
slot.
• Set the MD recording length mode, “LP:”-prefix
addition mode, and group recording mode (see left
column and above).
4
Press REC SPEED to select the
recording speed you want.
• Each time you press the button, recording
speed changes as follows:
• If you have selected Program Play or Random Play,
go to step 6.
Setting MD Recording Modes
Before recording on MDs, set the recording length mode
(SP/LP2/LP4), “LP:”-prefix addition mode, and the group
recording mode.
On the remote control ONLY:
To set the recording length mode
The recording length mode can be set and stored for each
source.
1) Select the source (FM, AM, CD, TAPE, or AUX) to
record.
2) Press REC TIME.
• Each time you press the button, the
recording length mode changes as follows:
SP: Records using standard-hour stereo recording.
The SP indicator lights up on the display.
LP2: Records using 2 times long-hour stereo
recording. The LP2 indicator lights up on the
display.
LP4: Records using 4 times long-hour stereo
recording. The LP4 indicator lights up on the
display.
To set “LP:”-prefix addition mode
You can select whether or not to add “LP:” to the beginning
of the title for the tracks recorded using the stereo long-hour
recording mode (LP2 or LP4).
Press LP: while holding SHIFT.
• Each time you press these buttons, the “LP:”-prefix
addition mode alternates between on and off.
(LP:) ON: Adds “LP:” to the beginning of the track title.
The total number of characters you can enter for
an MD is reduced (for details, see pages 51 –
53).
(LP:) OFF: Does not add “LP:” to the beginning of the track
title.
REC
TIME
BEEP
LP: SHIFT
GROUP REC
ON/OFF
REC
SPEED
SP LP2 LP4
(LP:) ON (LP:) OFF
MD GROUP ON MD GROUP OFF
x1
(Normal speed)
x 2
(2 times normal speed)
x4
(4 times normal speed)
DISC UP
DISC DOWN
Continued
EN28-36_UX-J55MD[UB]f.p65 7/1/03, 4:41 PM 30