JVC 0803AIMMDWJEM User Manual

Page 60

Advertising
background image

57

English

Before the start time, the DAILY indicator and “DAILY
TIMER STANDBY” start flashing on the display.

Before the shut-off time, the DAILY indicator and “DAILY
TIMER OFF” start flashing on the display.

To turn off the Daily Timer after its setting is done
1
Press CLOCK/TIMER repeatedly until “DAILY TIMER”

appears on the display.

2 Press CANCEL.

The (timer) and DAILY indicators go off from the display.

To turn on the Daily Timer again
1
Press CLOCK/TIMER repeatedly until “DAILY TIMER”

appears on the display.

2 Press SET repeatedly until the settings are shown on the

display for your confirmation.
The (timer) and DAILY indicators light up on the
display.

Adjusting the hour and minute of the start and shut-off time using the

number buttons in steps 4 - 1), 4 - 3), 5 - 1), and 5 - 3)
Ex.: To adjust the hour/minute to 5, press 5.

To adjust the hour/minute to 12, press +10, then 2.
To adjust the hour/minute to 20, press +10, then 10 (or press +10
twice, then 0).

If the unit is kept turned on when the start time comes

Daily Timer does not work at all.

Daily Timer will be canceled and the unit will not turn off

automatically in the following cases:
– When you change the source.
– When you enter the MD editing or title entry mode.
– When you turn off the Daily Timer (see above).

5

Set the shut-off time.

1) Press

¢ or 4 repeatedly

to adjust the hour.
You can also adjust the hour
using the number buttons.

2) Press SET.

The minute digits start flashing.

3) Press

¢ or 4 repeatedly

to adjust the minute.
You can also adjust the minute
using the number buttons.

4) Press SET.

The volume setting appears on the
display.

6

Adjust the volume level.

1) Press

¢ or 4 repeatedly

to adjust the volume level.
• You can adjust the volume

level to “– –” or within the
range of 0 (silent) to 40 (maximum).

• When you select “VOLUME – –,” the volume is set

to the volume level when you turn off the unit.

2) Press SET.

The DAILY indicator stops flashing and
remains lit. The contents of this setting
appear on the display for your
confirmation.

7

Press STANDBY/ON

to turn

off the unit if you have set the
timer with the unit turned on.

GROUP SKIP

GROUP SKIP

DAILY

DAILY

STANDBY/ON

SET

GROUP SKIP

GROUP SKIP

DAILY

Ex.: When you set shut-off time to 8:00.

SET

GROUP SKIP

GROUP SKIP

SET

DAILY

Clock indication

EN54-58_UX-J55MD[UB]f.p65

7/1/03, 4:44 PM

57

Advertising
This manual is related to the following products: