JVC 0803AIMMDWJEM User Manual
Page 39
36
English
To stop recording, press
7.
“WRITING” flashes on the display for a while.
To eject the MD or tape, press
7 to stop the recording, then
press the corresponding eject button.
To record a single track during play or pause
On the remote control ONLY:
While playing back or pausing a track you
want to record, press MD&TAPE REC.
The playback of the track is stopped, and the
same track starts playing from the beginning again. This time,
the MD recorder and cassette deck start recording the track.
• After the track is recorded, both playback and recording
stop automatically.
To change the information shown on the display
On the remote control ONLY:
Press DISP/CHARA.
• Each time you press the button, the recording
indications, the current track numbers of
both the disc and the MD, and the clock
indication appear in sequence on the display.
• When recording from a CD-R/RW
You cannot make a digital recording from a digital-copied CD-R/RW on
an MD. “SCMS CANNOT COPY” appears on the display and an analog
recording starts (see page 63).
• When recording on an MD and a tape at the same time
A 4-second blank before each track is not made on the tape.
MD&TAPE
REC
MD&TAPE
REC
DISP/CHARA
MD remaining
recording time
The track number
on the disc currently
being recorded
MD and tape
recording indicators
Remaining
playing time
C D
TAPE
REC
REC
1
2
3
4 5
MD
x 1
SP
Recording CD onto an MD and a Tape
—CD Synchronized Recording
With this recording method, you can start and stop CD play,
MD and tape recordings at the same time.
1
Load discs into the 5-CD changer.
• If the current playing source is not “CD,” press
CD
6, then 7 before going to the next step.
• You can make a program (see page 17) or select Random
Play (see page 18) if you want.
= Go to step 3.
On the remote control ONLY:
2
Press DISC UP
or DISC DOWN
to
select the disc you want to record, then
7
before going to the next step.
3
Insert a recordable MD into the MD loading
slot and put a recordable cassette into the
cassette loading slot.
For the MD:
Set the MD recording length mode, “LP:”-prefix addition
mode, and group recording mode (see “Setting MD
Recording Modes” on page 30).
• Set the MD recording speed to “x1.”
For the cassette:
Press REV.MODE to select Reverse Mode as necessary.
4
Press MD&TAPE REC.
CD play and recording start.
• When you select a track by pressing
¢
or
4 before pressing MD&TAPE REC,
recording starts from the selected track (except
when Program Play is selected).
The REC (MD recording) and REC (tape recording)
indicators start flashing on the display.
When CD player stops, MD recorder and the cassette
deck stop automatically.
DISC UP
DISC DOWN
EN28-36_UX-J55MD[UB]f.p65
7/1/03, 4:42 PM
36