JVC 0803AIMMDWJEM - Manual (Page 45)

42
English
Joining Two Groups—JOIN GR
This function allows you to join two adjacent groups into a
single group.
When the groups have their own titles, the title of the
preceding group is reassigned to the newly joined group.
Once two groups are joined, the other groups are renumbered.
• To stop any time during the editing process below before
step 6, press GROUP TITLE/EDIT.
1
Insert an MD you want to edit into the MD
loading slot.
On the remote control ONLY:
2
Press GROUP TITLE/EDIT
repeatedly until “JOIN GR ?”
appears on the display.
• If you want to stop this editing process, press CANCEL.
3
Press SET.
• If the loaded MD has only one or no group, you cannot
go to the following steps.
• During playback:
The group number of the currently playing track will
appear on the right. If the track does not belong to any
group, the group number will be indicated as “– –.”
4
Press GROUP SKIP
¢ or GROUP SKIP
4 while holding SHIFT to select the two
adjacent groups you want to join.
GROUP TITLE
/EDIT
SET
5
Press SET.
• To cancel the setting, press CANCEL, then repeat from
step 4.
6
Press ENTER.
“EDITING” appears on the display. Then
“WRITING” and the REC (MD recording)
indicator flash while the editing you have
made is being recorded on the MD.
To divide the group, see the DIVIDE GR function on page
41.
When “CANNOT JOIN” appears on the display in
step
5
You are trying to join two groups which are separated by another track(s) in-
between. In this case, you need to move either of the groups (see page 43) or
the track(s) (see page 49).
SET
ENTER
GROUP SKIP GROUP SKIP
SHIFT
Ex.: When groups 7 and 8 are selected.
Continued
EN37-45_UX-J55MD[UB]f.p65 7/1/03, 4:46 PM 42