JVC 0803AIMMDWJEM - Manual (Page 18)

15
English
3
Press the same disc eject button (CD1
0 –
CD5
0) you have pressed in step 1 .
The disc tray closes.
When loading more than one disc at a time
Press the disc eject button (CD1 0 – CD50) for the next tray you want to
place a disc onto. The first disc tray automatically closes and the next disc
tray comes out.
Playing Back All the Discs
—Continuous Play
You can play discs continuously.
1
Load discs into the 5-CD changer.
• See “Loading Discs” on the left column.
2
Press DISC UP or DISC DOWN (or
DISC SELECT on the unit) repeatedly to
select the disc you want.
Playback starts from the first track of the selected disc.
• You can also select a disc and start continuous play while
a source other than “CD” is selected (see page 16).
• You can also select and start playback a desired track of
the selected disc (see “To go to another track” on page
16 and “To go to another track directly using the
number buttons” on page 17).
• Without selecting the disc number, pressing CD 6
starts playing back the currently selected disc.
To stop play for a moment, press CD 6.
While pausing, the elapsed playing time flashes on the display.
• When the key-touch tone is activated (see page 10), the unit
keeps beeping while pausing.
Playing Back Discs on the 5-CD Changer
This unit has been designed to play back the following
discs—CD, CD-R, and CD-RW.
When playing a CD-R or CD-RW
User-edited CD-Rs (CD-Recordable) and CD-RWs (CD-
ReWritable) can be played only if they are already
“finalized.”
• Usually you can play back your original CD-Rs or CD-
RWs recorded in audio CD format. However, sometimes
they may not play depending on their characteristics or
recording conditions.
• Before playing CD-Rs or CD-RWs, read their instructions
or cautions carefully.
• Some CD-Rs or CD-RWs may not play on this unit because
of their disc characteristics, damage or stain on them, or if
the player’s lens is dirty.
• CD-RWs may require a longer readout time. This is
because the reflectance of CD-RWs is lower than for
regular discs.
Loading Discs
On the unit ONLY:
1
Press one of the disc eject buttons (CD1
0 –
CD5
0) for the disc tray you want to load a
disc onto.
The unit automatically turns on and the selected disc tray
comes out if it is unlocked. See “Prohibiting Disc Ejection
—Disc Lock” on page 19.
• Disc tray is counted from bottom to top. The bottom
tray is disc tray 1 and top tray is disc tray 5.
2
Place a disc correctly on the circle of the disc
tray, with its label side up.
• When using a CD single (8 cm), place it on the inner
circle of the disc tray.
Good
Not good
CD1 0 CD2 0 CD3 0 CD4 0 CD5 0
CD1 0 CD2 0 CD3 0 CD4 0 CD5 0
Elapsed playing time
Current track number
DISC UP
DISC DOWN
DISC
SELECT
‹ / 8
CD
Disc tray number
(On the remote control) (On the unit)
C D
1 2 3 4 5
CD indicator and
disc tray indicators
EN15-19_UX-J55MD[UB]f.p65 03.7.10, 0:00 PM 15