JVC 0803AIMMDWJEM - Manual (Page 31)

28
English
Recording on MDs
Before You Start Recording on an MD
• It may be unlawful to record or play back copyrighted material without the consent of the copyright
owner.
• When you record onto partially recorded MD, its contents are not erased or overwritten. The recording starts from the
point following the last recorded track of the MD.
If you want to record on such an MD from the beginning, you have to erase its contents first (see “Erasing All Tracks
—ALL ERASE” on page 50).
• When an MD is fully recorded, recording will stops automatically.
• The recording level is automatically set correctly, so it is not affected by the volume level. Thus, during recording you can
adjust the sound you are actually listening to without affecting the recording level.
• While recording, you can hear sound mode effect and/or the AHB PRO (Active Hyper Bass PRO) effect through the
speakers or headphones. However, the sound is recorded without these effects (see pages 11 and 12).
• You can make a digital to digital recording from an audio CD onto an MD.
When selecting FM, AM, TAPE, or AUX as the source, you can make an analog to digital recording only.
• You cannot record more than 254 tracks onto an MD, even if there is still enough recording time remaining on it.
About the track marks
When playing an MD, you can move among the tracks.
You can do this because there is a mark recorded at the
beginning of each track enabling you to locate the track.
This mark is called a “track mark” and the portion between
two adjacent track marks is called a “track.”
• When using CD synchronized recording, a track mark
is recorded at the beginning of each track. You cannot
put a track mark manually.
• When recording from an analog source such as FM,
AM, TAPE, or AUX, you can select “Auto Track
Recording” and “Manual Track Recording” by pressing
CD REC MODE (see page 32).
To add a track mark after recording is over, you can use
the DIVIDE function (see page 47).
Erasure prevention tab
Disc protected: Recording/
Editing not possible Recording/Editing
possible
To avoid erasing important recordings
The recordable MD has an erasure prevention tab so that
important recordings are not accidentally erased. When
you finish recording or editing, slide to open the erasure
prevention tab on the cartridge side surface. New recording
or editing is now no longer possible. (If you try to do,
“DISC PROTECTED” appears on the display.)
To do re-recording or editing, return the tab to the closed
position.
If “PLAY BACK DISC” appears on the display
when you try to record on an MD
The MD is only for playback use, not for recording (see page 63).
Continued
EN28-36_UX-J55MD[UB]f.p65 7/1/03, 4:41 PM 28