JVC CA-UXEP25 - Manual (Page 20)

17
PS (Program Service):
The station name appears.
“NO PS” appears if
no signal is sent.
PTY (Program Type):
The broadcast program type appears.
“NO PTY”
appears if no signal is sent.
RT (Radio Text):
The text message sent by the station appears.
“NO RT” appears if no signal is sent.
Station Frequency:
The frequency of the selected station appears on
the display.
memo
• If searching fi nishes at once, “PS”, “PTY” and
“RT” will not appear on the display.
• If you press DISPLAY MODE while listening to
an AM (MW) station, the display only shows
station frequency.
On characters displayed
When the display shows PS, PTY or RT text,
the display cannot show accented letters; For
example,
“A” may represent accented “A’s” like
“Б, В, Г, А, Д and Å”.
To search for a program by the PTY codes
One of the advantages of the Radio Data System
service is that you can locate a particular kind of
program by specifying the PTY codes.
To search for a program using PTY codes:
1 While listening to an FM station, activate
PTY search.
2 Select a desired PTY code while “SE-
LECT PTY” is blinking.
Each time you press the button, the display
shows a PTY category in the following order: