JVC CA-UXEP25 - Manual (Page 24)

21
To adjust the treble
Changing the Display Brightness
— DIMMER
Remote
ONLY
You can dim the display window.
Setting the Clock
Remote
ONLY
Without setting the built-in clock, you cannot use
the Daily Timer and sleep Timer (see page 26).
• To exit from the clock setting, press CLOCK/
TIMER as required.
• To go back to the previous step, press
CANCEL.
1 Activate the clock setting mode.
• If you have already adjusted the clock before,
press the button repeatedly until the clock
setting mode (see page 26) is selected.
2 Adjust the hour.
3 Adjust the minute.
The built-in clock starts working.
To check the current time during play
If there is a power failure
The clock loses its setting and blinks. You need to
set the clock again.
DIMMER ON
DIMMER OFF
(Canceled)
CLOCK
Source information
TREBLE BASS
Canceled