JVC HR-J449MS - Manual (Page 16)

16
Your recorder needs to memorise all necessary stations in preset
positions in order to record TV programmes. Auto Channel Set
automatically assigns all receivable stations in your area so that
you can call them up with the CHAINE buttons without going
through any vacant channels.
Perform the following steps only if auto channel set has not
been set correctly by Auto Set Up function or if you have
moved to a different area.
INITIAL SETTINGS (cont.)
Tuner Set
Turn on the TV and select the AV mode.
1 2
4 5
3
6
8
0
7 9
2
4
1
3
CHAINE
OK
MULTI-FONCTIONS
fi%
fi
fi
MENU
TURN ON THE RECORDER
1
Press .
ACCESS MENU PRINCIPAL
SCREEN
2
Press MENU twice.
PERFORM AUTO CHANNEL
SET
3
Move the highlight bar (pointer) to "REGL.AUTO.DEX
CANAUX" by pressing MULTI-FONCTIONS
%fi, then
press OK.
● The Regl. auto des canaux screen appears, and
remains on screen while the recorder searches for
receivable stations.
Wait until the screen as shown in
step 4 appears.
VIEW CONFIRMATION
SCREEN
4
The stations your recorder
located appear on a
Confirmation screen —
preset positions (PR),
channels (CH)* and station
names (ID –
੬
pg. 21). To
view the next page of the
listing, press MULTI-
FONCTIONS
%fi
. The
blueback screen and the
program currently being broadcast by the highlighted
station appear alternately for 5 seconds each.
* F: SECAM L VHF/UHF reception
A: SECAM L cable network
C: PAL or SECAM B/G cable network
No indication: PAL or SECAM B/G VHF/UHF reception
● The clock and the Guide Channels will also be set
automatically during Auto channel Set.
MENU PRINCIPAL
AUTRES REGLAGES
REGL. AUTO. DES CANAUX
REGL. MANUEL CANAUX
REGL. DES NUMEROS GUIDE
REGLAGE DE L'HORLOGE
[ 5∞] =
[MENU] : SORTIE
REGL. AUTO DES CANAUX
VEUILLEZ ATTENDRE S. V. P.
[MENU] : SORTIE
PR CH ID PR CH ID
01 F25 TF1 08 F33 – – – –
02 F22 FR2 09 – – – –
03 F28 FR3 10 – – – –
04 – – – – 11 – – – –
05 F06 – – – – 12 – – – –
06 F30 – – – – 13 – – – –
07 – – – – 14 – – – –
[ 5∞ ]
= : MONTAGE
= [ANNUL.] : ANNULER
[MENU] : SORTIE
5
5
%
%