JVC HR-J449MS - Manual (Page 22)

22
Clock Set
If you performed Auto Set Up (
੬
pg. 14) or Auto Channel Set
(
੬
pg. 16) without ever having set the clock previously, the
recorder’s built-in clock is also set automatically. The Auto and
Manual clock setting procedures are necessary when . . .
– a power outage of more than 60 minutes occurs.
– the tuner has been set manually.
– the user desires to set the clock slightly ahead of the actual time.
– the clock was not set even after Auto Set Up or Auto
Channel Set was performed.
Whether you perform Auto or Manual clock setting, you can
use the convenient Just Clock function.
Just Clock
The Just Clock function provides accurate time keeping through
automatic adjustments at regular intervals, by reading data from
a PDC signal.
The Just Clock option appears in the Clock Set and Auto Clock
Set screens, and can be set “M.” or “A.” (the default setting is
“M.”). Press OK until the Just Clock setting begins blinking, then
press MULTI-FONCTIONS
%fi to change the setting.
IMPORTANT: If you turn off Just Clock off, the accuracy of your
recorder’s built-in clock may be reduced, which could
adversely effect timer recording.
Both Auto and Manual clock setting procedures begin from step 4.
Turn on the TV and select AV mode.
INITIAL SETTINGS (cont.)
1 2
4 5
3
6
8
0
7 9
2
4
1
3 OK
MULTI-FONCTIONS
MENU
TURN THE RECORDER ON
1
Press .
ACCESS MENU PRINCIPAL
SCREEN
2
Press MENU twice.
ACCESS REGLAGE DE
L'HORLOGE SCREEN
3
Move the highlight bar (pointer) to "REGLAGE DE
L'HORLOGE" by pressing MULTI-FONCTIONS
%fi,
then press OK. The Clock Set screen appears.
Preparation
MENU PRINCIPAL
AUTRES REGLAGES
REGL. AUTO. DES CANAUX
REGL. MANUEL CANAUX
REGL. DES NUMEROS GUIDE
REGLAGE DE L'HORLOGE
[ 5∞] =
[MENU] : SORTIE
REGLAGE DE L'HORLOGE
HEURE DATE ANNEE
0: 00 01 . 01 00
HORL. AUTO: M.
CHAINE 1
[ ]: HEURE AUTO
[
5∞] =
[MENU] : SORTIE
5