JVC HR-J449MS - Manual (Page 36)

36
RECORDING (cont.)
B.E.S.T.
Picture System
The B.E.S.T. (Biconditional Equalised Signal Tracking) system
checks the condition of the tape in use during recording and
playback, and compensates to provide the highest-possible
recording and playback pictures. The default setting for both
recording and playback is “M.”.
Recording
LOAD A CASSETTE
1
Insert a cassette with the record safety tab intact.
● The recorder power comes on automatically.
ACCESS MENU PRINCIPAL
SCREEN
2
Press MENU twice.
ACCESS AUTRES
REGLAGES SCREEN
3
Move the highlight bar
(pointer) to "AUTRES
REGLAGES" by pressing
MULTI-FONCTIONS
%fi,
then press OK.
CONFIRM B.E.S.T. STATUS
4
The default setting is “M.”.
If this is the case, go to
step 5. If not, press MULTI-
FONCTIONS
fi to move
the highlight bar (pointer)
to “B.E.S.T.”, then press
MULTI-FONCTIONS to
set to “M.”.
RETURN TO NORMAL
SCREEN
5
Press MENU.
START RECORDING
6
Press and hold q and 4 on the remote, or q on the
recorder.
● The recorder spends approximately 7 seconds
assessing the condition of the tape, then begins
recording.
● When the "BEST" indicator begins blinking, that
means adjustment is complete.
● Pressing the recorder's q button while "BEST" is
displayed does not start Instant Timer Recording
(
੬
pg. 41).
Turn on the TV and select the AV mode.
q
0
1
3 OK
MULTI-FONCTIONS
Display Panel Indication
As the tape check progresses, the “—” marks on the display
panel increase upward. Once the "BEST" indicator starts
blinking, the check is complete.
HR-J746MS
HR-J449MS
MENU PRINCIPAL
AUTRES REGLAGES
REGL. AUTO. DES CANAUX
REGL. MANUEL CANAUX
REGL. DES NUMEROS GUIDE
REGLAGE DE L'HORLOGE
[ 5∞] =
[MENU] : SORTIE
5
%
MENU AUTRES REGLAGES
ENR. PROG. AUTO : M.
O.S.D.
: M.
B.E.S.T. : M.
SELECTION AV2 : AUX.
[ 5∞] = [ ] : M./A.
[MENU] : SORTIE