JVC XV-N55SL - Manual (Page 15)

10
Connecting the power cord
When all the audio/video connections have been made, connect the AC power plug to the wall outlet. Make sure that the plugs are inserted
firmly. The STANDBY lamp on the receiver and indicator on the DVD player light in red.
• Keep the power cord away from the connecting cables and the antenna. The power cord may cause noise or screen interference.
NOTES
• The preset settings such as preset channels and sound adjustment may be erased in a few days in the following cases:
– when you unplug the power cord.
– when a power failure occurs.
• Disconnect the power cord:
– if you are not going to use the player for a long period of time.
– before cleaning the player.
– before moving the player.
• Do not:
– connect or disconnect the power cord with wet hands.
– pull the power cord when disconnecting it, as this may damage the cord and cause fire, electric shock, or other accidents.
CAUTIONS:
• Do not touch the power cord with wet hands.
• Do not alter, twist or pull the power cord, or put anything heavy on it, which may cause fire, electric shock, or other accidents.
• If the cord is damaged, consult a dealer and have the power cord replaced with a new one.
Getting started
Analogue connection for DVD MULTI playback (see page 34)
• DVD MULTI playback is not available for XV-N55SL.
COAXIAL
AM LOOP ANTENNA
DVD IN
AUDIO
L
R
L
R
FM 75
AM EXT CENTER
FRONT
AV IN / OUT
AV IN
SUBWOOFER OUT
DIGITAL IN DIGITAL 3 (TV) DIGITAL 2 (STB)
DIGITAL 1 (DVD) CENTER SPEAKER SURROUND SPEAKERS
RIGHT LEFT RIGHT LEFT
FRONT SPEAKERS
SUB WOOFER SURR (REAR)
CAUTION: SPEAKER IMPEDANCE 8 ~ 16
DVD
IN
AUDIO
L
R
L
R
CENTER
FRONT SUB
WOOFER
SURR
(REAR)
VCR TV
DVD STB
DVD Player (ex. XV-NA7SL)
RX-ES1SL
Stereo audio cord
(not supplied)
Monaural
audio cord
(not supplied)
Monaural audio cord
(not supplied)
Stereo audio cord (not supplied)
To center channel audio output
To surround left channel audio
output
To surround right channel audio
output
To subwoofer output
To front right channel audio
output
To front left channel audio output
NOTE
When using the DVD MULTI playback, use the same DVD player
connected to this receiver by a SCART cable. If you connect a
different DVD player, the mixed sound from front left and right
channels are reproduced.
01-10.RX-ES1&XV-N55[B]f 03.2.18, 1:47 PM 10