JVC XV-N55SL - Manual (Page 69)

64
Manufacturer Codes
JVC 01*
AKAI 02, 36
BELL+HOWELL 03, 16
BLAUPUNKT 04
CGM 03, 05, 16
DAEWOO 34
DIGITAL 05
FISHER 03, 16
G.E. 06
GRUNDIG 07
HITACHI 08, 09
LOEWE 05, 10, 11
MAGNAVOX 04, 05
MITSUBISHI 12 – 15
NOKIA 16
NORDMENDE 17 – 19, 31
ORION 20
PANASONIC 21
PHILIPS 05, 22
PHONOLA 05
SABA 17 – 19, 23, 31
SAMSUNG 24, 25
SANYO 03, 16
SHARP 26, 27
SIEMENS 07
SONY 28 – 30, 35
TELEFUNKEN 17 – 19, 31, 32
TOSHIBA 33
* Initial setting
Manufacturers’ codes for VCR
Manufacturer Codes
JVC 01*
AKAI 02, 05
BLAUPANKT 03
DAEWOO 09, 30, 31
FENNER 04, 30, 31
FISHER 05
GRUNDIG 06
HITACHI 07, 08
IRRADIO 02, 05
MAGNAVOX 09
MITSUBISHI 10, 32
MIVER 03
NOKIA 11, 33
NORDMENDE 12, 13, 17, 25 – 27
ORION 14
PANASONIC 15, 16
PHILIPS 09
SABA 12, 13, 17, 25 – 27
SAMSUNG 09, 18, 31
SANYO 05
SCHNEIDER 02, 05
SHARP 19
SONY 20 – 24
TELEFUNKEN 12, 13, 17, 25 – 27
THOMSON 12, 13, 17, 25 – 27, 29
TOSHIBA 28
* Initial setting
Manufacturers’ codes for TV
Manufacturers’ codes are subject to change without notice. If they are
changed, this remote control cannot operate the equipment.
❏ Changing the transmittable signals for operating a
VCR
1 Press and hold VCR .
2 Press VCR.
3 Enter the manufacturer’s code using buttons 1 – 9,
and 0.
4 Release VCR .
Now, you can perform the following operations on the VCR.
VCR : Turn on or off the VCR.
After pressing VCR (source selecting button), you can perform
the following operations on the VCR.
CHANNEL +/–: Change the channel numbers on the
VCR.
1 – 9, 0: Select the channel numbers on the
VCR.
3: Start playback.
7: Stop playback.
8: Pause playback. To release it, press
3.
¡: Fast-wind a tape.
1: Rewind a tape.
5 Try to operate your VCR by pressing VCR .
When your VCR turns on or off, you have entered the
correct code.
If more than one codes are listed for your brand of VCR, try
each one until the correct one is entered.
❏ Changing the transmittable signals for operating a
TV
1 Press and hold TV .
2 Press TV.
3 Enter the manufacturer’s code using buttons 1 – 9,
and 0.
4 Release TV .
Now, you can perform the following operations on the TV.
TV : Turn on or off the TV.
TV VOL +/–: Adjust the volume.
TV/VIDEO: Change the input mode (either TV or
VIDEO).
After pressing TV (source selecting button), you can perform
the following operations on the TV.
CHANNEL +/–: Change the channel numbers.
1 – 9, 0: Select the channel numbers.
5 Try to operate your TV by pressing TV .
When your TV turns on or off, you have entered the correct
code.
If more than one codes are listed for your brand of TV, try
each one until the correct one is entered.
Operating other manufacturers’ equipment
62-64.RX-ES1&XV-N55[B]f 03.2.18, 1:45 PM 64