JVC VN-C205 - Manual (Page 46)

46
Settings (Step 2 Network Settings)
● Setting the [Frame Rate] screen
To set the frame rate for local recording, select
"Change the Recording Frame Rate during trigger
recording", followed by selecting the frame rate
accordingly.
Default frame rate is set at 10 fps. A frame rate of 10
fps for recording will be used when this box is not
checked. (Set values: 30, 15, 10, 8, 6, 5, 4, 3, 2, 1)
Note
During local recording to CF cards, the frame rate
is also dependent on the performance of the CF
card in use. When the size of each recording file
exceeds 8 MB (equivalent to a frame rate of 30 fps
over a duration of about 8 seconds when the size
of each image is 33 KB), frames may be dropped.
For setting the recording time.
This can be set up to 30 seconds before and 60
seconds after the alarm input.
Cautions
●
[Before trigger] and [After trigger] values cannot
be set to "0" at the same time.
●
Due to the memory capacity of VN-C205, recording
time set for [Before trigger] and [After trigger] may
differ from the actual maximum recording time.
(Example)
At a resolution of 640 x 480 (10 fps) when the
size of each image is 40 KB, the actual maximum
recording times are as follows:
Without CF card : 5 seconds before trigger / 10
seconds after trigger - 0
seconds before trigger / 15
seconds after trigger
With CF card : 20 seconds before trigger / 60
seconds after trigger
For setting the priority.
Frame Rate
: Priority is given to frame rate settings.
Recording Time : Frame rate is automatically adjusted
such that recording can be
performed according to the specified
recording time.
2-4 Other Settings Using the "VN-C205U Setup Tool" (5. Recordung Setting) (Continued)
2
3
4
VN-C205_p46-p55 05.6.28, 2:25 PM 46