JVC VR-N100U - Manual (Page 72)

VR-N100U USERS MANUAL
Page 72 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0
5.2. Network IP Cameras
VR-N100U is designed to support the latest IP cameras from JVC. Unfortunately, each make as well as model utilizes different
protocols, and offer slightly different features and functions. Therefore, camera support will be an ongoing process for VR-
N100U. Below is a list of supported IP cameras at the time this manual was published.
NOTE1: Please visit the various network camera manufacturer web sites for detail specifications and camera firmware
updates. All network cameras should have the latest available firmware and set to manufacturer’s default.
Below is a list of JVC network IP cameras that are currently supported or in the process of being supported.
VN-C10U Fixed, Motion Detection Supported
VN-C11U Fixed, Motion Detection Supported
VN-C30U PTZ Supported
Details regarding the advanced settings for the above network IP cameras supported by VR-N100U are listed below.
NOTE1: Always make sure that your JVC network cameras are flashed with the latest firmware version prior to using the
device with VR-N100U.
NOTE2: For more detail information regarding the JVC devices, please visit their web site at
www.jvc.com or
http://pro.jvc.com/prof/main.jsp .
Advanced Settings for VN-C10U
JVC VN-C10U Configuration (Fixed Motion Detection Network Camera)
Resolution 160x120, 320x240, 640x480
@ 160x120 Max 30 fps
@ 320x240 Max 30 fps
Frames per
Second
@ 640x480 Max 8 fps
Quality Compression Rate
Automatic White Balance
Red Balance
Green Balance
Balance
NOTE: RED & GREEN gains are only applicable if Automatic WHITE is OFF
Automatic Gain Control
Brightness
Saturation
Backlight Compensation
Backlight
Backlight Compensation Area
Shutter Shutter Speed
Motion
Detection