JVC BD-X200U - Manual (Page 32)

57
Playback
Playing Discs
This DVD recorder can also be used to playback discs that it has recorded and finalized.
When a disc is finalized, its title menu will be used to create the top menu.
The action taken by your BD-X200 when a disc it has finalized is inserted or when playback of a title has ended will depend on the
settings of DISC IN ACTION and TITLE END as set on the RECORDER MENU (2/2) screen during recording.
* Playback may not proceed smoothly with discs recorded using different devices, regardless of whether or not they have been
finalized.
OPERATE
PHONES REV STOP PLAY
DVD RECORDER BD-X200
FWD PAUSE REC
BUSY
OPEN/CLOSE
TOP MENU MENU
OPTION DV Y/C LINE
SET UP AUDIO CH1
CH2
TITLE
DOLBY DIGITAL
LPCM MPEG
CHAPTER
SET
1. Insert a disc.
The action of the DVD recorder depends on the setting of DISC IN ACTION from the RECORDER MENU (2/2) screen. The
following table describes the operations to be performed in either case.
STOP button
Cursor buttons
(
t, 8, 7, and 6)
PLAY button
PAUSE button
DISC IN ACTION setting made during recording
MENU TITLE
The title menu will appear
2. Select the number of the title to be played.
Use the t, 8, 7, and 6 buttons to select the title number
for playback.
3. Press the SET button to begin playback.
4. Set to Still mode.
This is done by pressing the PAUSE button.
● The DVD recorder enters Still mode.
● If the PAUSE button is then pressed again in Still mode, the DVD recorder will advance playback by a single frame.
5. Restart playback.
Press the PLAY button.
Ⅵ The DVD recorder will behave as follows when title playback has ended.
These actions will depend on the setting made for TITLE END from the RECORDER MENU (2/2) screen during recording.
6. Stop playback.
This is done by pressing the STOP button.
● The DVD recorder enters Stop mode.
Playback starts automatically from the first title.
TITLE END SETTING made during recording
MENU REPEAT
The DVD recorder enters Stop mode and displays the title
menu. Repeat playback is carried out within the title.
SET button
58
Playback
Fast & Slow Playback
OPERATE
PHONES REV STOP PLAY
DVD RECORDER BD-X200
FWD PAUSE REC
BUSY
OPEN/CLOSE
TOP MENU MENU
OPTION DV Y/C LINE
SET UP AUDIO CH1
CH2
TITLE DOLBY DIGITAL
LPCM MPEG CHAPTER
SET
FWD button REV button
Fast-Forward & Fast-Reverse Play Slow-Forward & Slow-Reverse Play
Ⅵ Fast-forwarding
● Press the FWD button during playback or fast-reverse play
to start fast-forward play.
If pressed again during fast-forward play, this button toggles
the speed of fast-forward play between
×3 and ×15.
Ⅵ Fast-reversing
● Press the REV button during playback or fast-forward play
to start fast-reverse play.
If pressed again during fast-reverse play, this button toggles
the speed of fast-reverse play between
×3 and ×15.
Ⅵ Slow-forwarding
● Press the FWD button in Still mode or during slow-reverse
play to start slow-forward play.
If pressed again during slow-forward play, this button toggles
the speed of slow-forward play between
×0.5 and ×0.06.
Ⅵ Slow-reversing
● Press the REV button in Still mode or during slow-forward
play to start slow-reverse play.
If pressed again during slow-reverse play, this button toggles
the speed of slow-reverse play between
×0.5 and ×0.06.
Playing the Previous or Next Chapter
Ⅵ Press the t button while the DVD recorder is playing to move playback to the
start of the next chapter.
Ⅵ Press the 8 button while the DVD recorder is playing to move playback to the
start of the current chapter.
If the
8 button is pressed while the DVD recorder is playing the first chapter,
playback will return to the beginning of that chapter.
* The
t button is deactivated during playback of the final chapter. TOP MENU MENU
OPTION DV Y/C LINE
SET UP
SET
t button 8 button
Notes
● The DVD recorder can be returned to Playback mode during fast-forward, fast-reverse, slow-forward, or slow-reverse play by
pressing the PLAY button. Still mode can be activated by pressing the PAUSE button. Stop mode is activated by pressing the
STOP button.
● The displayed playback speed is not an exact value.