On the road 4-47 – Jaguar X-Type JJM 21 02 20/15 User Manual

Page 103

Advertising
background image

On the road 4-47

Fuels containing alcohol

Caution:

Take care not to spill fuel

during refuelling. Fuel containing
alcohol can cause paint damage,
which may not be covered under the
warranty.
Some fuel suppliers sell fuel containing

alcohol without advertising its presence.

Where uncertainty exists check with the

service station operator.
Note: Some difficulty in starting may be

encountered when using alcohol blended

fuel.

Ethanol
Fuels containing up to 10 per cent

ethanol (grain alcohol) may be used.

Ensure the fuel has octane ratings no

lower than those recommended for

unleaded fuel. Most drivers will not

notice any operating difference with fuel

containing ethanol. If a difference is

detected, the use of conventional

unleaded fuel should be resumed.

Methanol
Some fuels contain methanol (methyl or

wood alcohol). If you use fuels containing

methanol the fuels must also contain

co-solvents and corrosion inhibitors for

methanol. Also, do not use fuels that

contain more than three per cent

methanol even if they contain co-solvents

and corrosion inhibitors. Fuel system

damage or vehicle performance problems

resulting from the use of such fuels is not

the responsibility of Jaguar Cars Limited,

and may not be covered under the

warranty.

Methyl Tertiary Butyl Ether (MTBE)
Unleaded fuel containing an oxygenate

known as MTBE can be used provided the

ratio of MTBE to conventional fuel does

not exceed 15 per cent.
MTBE is an ether based compound,

derived from petroleum, which has been

specified by several refiners as the

substance to enhance the octane rating of

fuel.

Catalytic converters
A few precautions on the use of vehicles

fitted with catalytic converters are

necessary. These are:
1. In order to maintain the efficiency of

the emission control system it is

essential that unleaded fuel is used.

Use of leaded fuel will seriously

damage the catalytic converters.

2. Heavy impact on the converter casings

must be avoided.

3. The engine settings must not be

altered; they have been established to

ensure that the vehicle will comply

with stringent exhaust emission

regulations. Incorrect engine settings

could cause unusually high catalytic

converter temperatures and thus

result in damage to the converter and

vehicle. If adjustment to the settings is

considered necessary, this should be

performed by a Jaguar Dealer.

Advertising