JVC CA-UXG45 - Manual (Page 13)

9
English
Daily Operations
—Playback
1 Turn on the power.
The STANDBY lamp on the main unit turns off.
• Without pressing STANDBY/ON ,
the System
turns on by pressing one of the source selecting
buttons in the next step.
2 Select the source.
Playback automatically starts if the selected source is
ready to start.
• If you press AUX, start playback source on the
external component.
3 Adjust the volume.
4 Operate the target source as explained
later.
To turn off (stand by) the System
To turn off the clock indication to save the power
While the System is turned off...
2
1
3
2
1
VOLUME
STANDBY/ON
3
4
4/1,
7,Á/¢
SET/
RESUME
PRESET UP,
PRESET DOWN
QP LINK
FM MODE
Numeric
buttons
MP3 MODE
DISPLAY
DIMMER
The STANDBY lamp on the main unit
lights up.
• A small amount of power is always
consumed even while on standby.
• Press the button again, to display the
clock indication.
For private listening
Connect a pair of headphones to the PHONES jack on the
main unit. The sound will no longer come out of the
speakers. Be sure to turn down the volume before
connecting or putting the headphones.
• Disconnecting the headphones will activate the
speakers again.
DO NOT turn off (stand by) the System with
the volume set to an extremely high level;
otherwise, the sudden blast of sound can
damage your hearing, speakers and/or
headphones when you turn on the System or
start playback.
STANDBY/ON
DIMMER
UX-G45[US].BOOK Page 9 Thursday, June 15, 2006 4:16 PM