Turning off the power automatically, English turning off the power automatically – JVC CA-UXG45 User Manual
Page 21
17
English
Turning Off the Power
Automatically
To turn off the System after playback is over—
Auto Standby
This function works only when the source is CD or tape.
When Auto Standby is in use, the A.STBY indicator lights
on the display.
When the disc and tape playback stops, the A.STBY
indicator starts flashing.
If no disc or tape operation is done for about 3 minutes while
the indicator is flashing, the System turns off (stands by)
automatically.
To turn off the System after a certain period of
time—Sleep Timer
1
Specify the time (in minutes).
2
Wait until the set time goes off.
To check the time remaining until the shut-off time
• If you press the button repeatedly, you can change the shut-
off time.
Remote
ONLY
A.STANDBY
(No indication)
A.STBY
Canceled
SLEEP
10
20
30
60
90
120
OFF
(Canceled)
SLEEP
UX-G45[US].BOOK Page 17 Thursday, June 15, 2006 4:16 PM