JVC CA-UXG45 - Manual (Page 62)

23
English
Setting the Timer
Using Daily Timer, you can wake up with music, etc. On the
other hand, with Recording Timer, you can make a tape of a
radio broadcast automatically.
• You can store three Daily Timer settings and one
Recording Timer setting; however, you can activate only
one of the four settings above at the same time.
• To exit from the timer setting, press CLOCK/TIMER as
required.
• To correct a misentry during the process, press CANCEL.
You can return to the previous step.
Remote control
SET/RESUME
CANCEL
PRESET UP,
PRESET DOWN
STANDBY/ON
CLOCK/
TIMER
How Daily Timer actually works
Once the Daily Timer has been set, the timer ( )
indicator and timer number indicator (1, 2, or 3) are lit on
the display. Daily Timer is activated at the same time
everyday until the timer is turned off manually or another
Daily Timer is activated.
When the on-time comes
The System turns on, tunes in to the selected station, or
starts playing the specified source.
• If “P – – –” is selected, the last tuned station will be
selected for Daily Timer.
• If “VOL – – –” is selected, the last specified value is
selected.
• While Daily Timer is working, the timer ( ) and
timer number indicators (1, 2, or 3) flash on the display.
• The timer setting remains in memory until you change
it.
• Without canceling the Daily Timer, you can change the
source or adjust the volume after Daily Timer starts
playback.
How Recording Timer actually works
When Recording Timer has been set, Timer ( )
indicator and the REC indicator are lit on the display.
Recording Timer works only once.
When the on-time comes
The System turns on, tunes in to the specified station, and
starts recording.
• If “VOL – – –” is selected, the last specified value is
selected.
When the off-time comes
The System stops recording, and turns off (stands by).
• The timer setting remains in memory until you change
it.
Remote
ONLY
Timer Operations
UX-G45[UW].BOOK Page 23 Tuesday, May 30, 2006 2:07 AM