Jura Capresso IMPRESSA S9/S7 - Manual (Page 15)

15
Ⅲ
NORMAL (example)
–
ⅥⅥⅥ _ _ _ +
Ⅲ Now turn the Rotary Switch (4) until the required amount of
powder is set.
Ⅲ
STRONG (example)
–
ⅥⅥⅥⅥ _ _ +
Ⅲ Confirm the selected setting by pressing the Rotary Switch (4).
Ⅲ
POWDER
QUANTITY
Ⅲ Now turn the Rotary Switch (4) until the following message is
displayed:
Ⅲ
EXIT
Ⅲ Now press the Rotary Switch (4) to leave the programming
mode.
Ⅲ
SELECT PRODUCT
13.5 Setting the amount of water for coffee,
espresso and coffee à la carte
The system’s basic settings include pre-defined amounts of water
(coffee 130 ml, espresso 60 ml, 2 coffees 260 ml, coffee à la carte
145 ml). However, these can be modified as required.
Ⅲ SELECT PRODUCT
Ⅲ Open the programming door (3). Press the Rotary Switch (4) un-
til you hear an acoustic signal.
Ⅲ
FILTER
NO or YES
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
played:
Ⅲ
WATER
QUANTITY
Ⅲ Press the Rotary Switch (4) to activate the program item.
Ⅲ
SELECT
PRODUCT
Ⅲ Press a product key of your choice.
Ⅲ
1 ESPRESSO (example)
60 ML
Ⅲ Turn the Rotary Switch (4) to adjust the amount of water and
then confirm your setting by pressing the Rotary Switch (4).
Ⅲ WATER
QUANTITY
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
played:
Ⅲ
EXIT
Ⅲ Press the Rotary Switch (4) to leave the programming mode.
Ⅲ
SELECT PRODUCT
13.6 Programming the temperature for coffee,
espresso and coffee à la carte
You can adjust the temperature for each type of coffee sepa-
rately. The temperature can be set to 2 different levels
(NORMAL, HIGH).
Ⅲ
SELECT PRODUCT
Ⅲ Open the programming door (3). Press the Rotary Switch (4)
until you hear an acoustic signal.
Ⅲ
FILTER
NO or YES
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
played:
Ⅲ TEMPERATURE
Ⅲ Now press the Rotary Switch (4) to start programming.
Ⅲ
SELECT PRODUCT
Ⅲ Then press a product key of your choice.
E