Jura Capresso IMPRESSA S9/S7 - Manual (Page 17)

17
Ⅲ Press the Rotary Switch (4) to leave the programming mode.
Ⅲ
SELECT PRODUCT
13.9 Economy mode
You can set your machine to various power saving modes.
Ⅲ SELECT PRODUCT
Ⅲ Open the programming door (3). Press the Rotary Switch (4)
until you hear an acoustic signal.
Ⅲ
FILTER
NO or YES
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
played:
Ⅲ
ECONOMY
MODE –
Ⅲ Now press the Rotary Switch (4) to start programming.
Ⅲ
ECONOMY
MODE -
Ⅲ Now turn the Rotary Switch (4) until the required economy
mode is displayed.
Ⅲ ECONOMY
MODE 2 (example)
Ⅲ Confirm the selected setting by pressing the Rotary Switch (4).
Ⅲ
ECONOMY
MODE 2 (example)
Ⅲ Now turn the Rotary Switch (4) until the following message is
displayed:
Ⅲ
EXIT
Ⅲ Now press the Rotary Switch (4) to leave the programming
mode.
Ⅲ
SELECT PRODUCT
Economy mode –
Selecting this level puts the IMPRESSA in constant stand-by
mode.
This setting allows you to make any of the products without having
to wait for the machine to heat up.
Select this setting if you want to make a lot of coffees with
hot or frothed milk and do not want to wait for the machine
to heat up first.
Economy mode 1
Selecting this level puts the IMPRESSA in constant stand-by mode
for making coffee. The machine is heated up separately if you need
steam for hot or frothed milk.
Select this setting if you make mostly black coffees and are
prepared to wait for approx. 1 minute before being able to
draw steam.
Economy mode 2
Selecting this level does not put the IMPRESSA in stand-by mode
(economy temperature). The machine heats up each time you make
coffee or need to draw steam.
The IMPRESSA switches to economy temperature 5 minutes after
you last used it.
Select this setting if you make very few coffees (with or
without milk) and are prepared to wait for approx. 30 sec-
onds for the machine to get ready.
13.10 Setting the time
You must program the time if you want to use the automatic
switch-on function.
E