JVC CA-UXHB4 - Manual (Page 21)

18
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL DOWN
SEARCH/
SCROLL UP
/
SELECT
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL
DOWN
SEARCH/
SCROLL
UP
/
SELECT
4
Press SEARCH/SCROLL UP
or SEARCH/SCROLL DOWN
to select a station.
• Each time you press the button, the station
changes step by step.
5
Press SELECT.
Signal reception indicator and the
current signal strength level appear (filled
blocks across from left to right).
• If the signal strength level does not reach to the signal
reception indicator, you cannot listen to the station well.
In this case, adjust the position of the antenna.
6
Press SELECT again.
A station is tuned in.
• For the description of information sent from the station,
see page 20.
Tuning in to a Station
1
Press SEARCH/SCROLL UP
or SEARCH/SCROLL DOWN
to select a station.
The list of the station appears.
2
Press SELECT to tune in to the
selected station.
• The unit does not tune in to the station
until you press SELECT.
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/ SCROLL
DOWN
SEARCH/ SCROLL
UP
/
SELECT
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/ SCROLL
DOWN
SEARCH/ SCROLL
UP
/
SELECT
On the remote control ONLY:
1
Tune in to the station you want to preset.
2
Press PROGRAM.
An available preset number starts flashing on the
display.
3
Press PRESET GROUP or
PRESET GROUP to select a
preset number, then press
PROGRAM.
The preset station is stored in memory.
4
To preset more stations, repeat steps 1 to 3
above, allocating a different preset number to
each station.
• Storing a new station on an already assigned number
erases the previously stored one.
When you unplug the AC power cord or if a power
failure occurs
The preset stations will remain in the unit.
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL
DOWN
SEARCH/
SCROLL
UP
/
SELECT
PROGRAM
PROGRAM
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/ SCROLL
DOWN
SEARCH/ SCROLL
UP
/
SELECT
Tuning in to a Preset Station
On the remote control ONLY:
1
Press FM/AM/DAB to select “DAB.”
The unit automatically turns on and tunes in to
the previously received DAB station.
2
Press PRESET GROUP or
PRESET GROUP repeatedly
to select a preset number.
To tune in to a preset station directly using the number
buttons
On the remote control ONLY:
Pressing the number button(s) allows you
to select the preset number you want.
Ex.: For preset number 5, press 5.
For preset number 10, press +10,
then press 0.
When you press a number with no preset station
“Empty Preset” appears on the display.
FM/AM/DAB
Presetting Stations
You can preset 10 DAB stations manually.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start again from step 2.
1 2 3
4 5 6
7 8
0
9
+10
PRESET GROUP
PRESET
GROUP
UP
DOWN
SEARCH/ SCROLL
DOWN
SEARCH/ SCROLL
UP
/
SELECT
Signal reception indicator
Signal strength level
Channel and frequency
Information sent from the station (Ex. program type)
Station name
Continued
17-24_UX-HB4[B]6.p65 04.8.5, 6:17 PM 18