John Lewis JLDWW 1201 - Manual (Page 16)

9. Unloading the dishwasher
Hot dishes are sensitive to knocks.The dishes should
therefore be allowed to cool down before removing from
the appliance.
Empty the lower basket first and then the upper one; this
will avoid water dripping from the upper basket onto the
dishes in the lower one.
Water may appear on the sides and the door of the
dishwasher as the stainless steel will eventually become
cooler than the dishes.
When the washing programme has finished, it is
recommended that the dishwasher is unplugged and
the water tap turned off.
"3 in 1" function
This function can be selected together with all programmes .
Place the "3 in 1" combi detergent tablet in the detergent
dispenser.
Close the dishwasher’s door and press the "On/Off" button,
the On/Off indicator light illuminates.
Press the "3 in 1" function button, the correspondent
indicator light illuminates. Remember that if this function is
selected, it will remain active also for the following
programmes, until it will be deactivated by pressing the "3 in
1" function button (indicator light off).
Select the required washing programme, after about 3
seconds the programme will start automatically.
With the use of 3 in 1 combi detergent tablets, the cycle
durations may change. In this case, in the digital display, the
indication of the running time of the programme is
automatically updated.
Once the programme is running, the "3 in 1" function can
NO longer be changed. If you want to exclude the "3 in 1"
function you have to cancel the programme setting (see "To
cancel a washing programme in progress") and then
deactivate the "3 in 1" function by pressing the "3 in 1"
button.
In this case you have to set a washing programme again.
16