John Lewis JLDWW 1201 - Manual (Page 18)

18
Something not working
Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions
given here, without calling out an engineer.
...a flashing fault code appears
The dishwasher will not start or stops during operation
The intervention of an alarm is indicated by:
- indicator light of the programme in progress is flashing
- a fault code is visible in the digital display.
Open the door and carry out the following suggested corrective actions (see following chart).
Once the checks have been carried out, to continue the programme, close the door and press the button of the programme that
was running before the intervention of the alarm.The programme will continue from the point at which it was interrupted. If the
fault code reappears contact our extended warranty administrators on 0870 0107887 who will give you details for your local
Service Force centre..
For other fault codes not described in the above chart will appear, please contact our extended warranty administrators on 0870
0107887 who will give you details for your local Service Force centre..
- Indicator light of the
programme in progress is
flashing
- in the digital display appears
The machine does not fill with
water.
- Indicator light of the
programme in progress is
flashing
- in the digital display appears
The dishwasher will not drain.
- Indicator light of the
programme in progress
is flashing
- in the digital display appears
Fault code / malfunction Possible cause Solutions
The water tap is blocked or furred with
limescale.
The water tap is turned off.
The filter (where present) in the threaded hose
fitting at the water inlet valve is blocked.
The water inlet hose has not been correctly
laid or it is bent or squashed.
Clean the water tap.
Turn the water tap on.
Clean the filter in the threaded hose
fitting.
Check the water inlet hose connection.
The sink spigot is blocked. Clean out the sink spigot.
The water drain hose has not been correctly
laid or it is bent or squashed. Check the water drain hose connection.
Anti-flood device has activated. Close the water tap and contact our
extended warranty administrators on
0870 0107887 who will give you details
for your local Service Force centre.
...there are problems when operating the dishwasher
The programme does not start
There is a whistling noise during
washing
Fault Possible cause Solutions
The dishwasher door has not been properly
closed.
The main plug is not plugged in.
The fuse has blown in the household fuse box.
Close the door.
Insert the mains plug.
Replace the fuse.
For dishwasher models with delay start
option:
Delay start has been selected. If dishes are to be washed immediately,
cancel the delay start.
Use a different brand of detergent. The whistling is not a cause for concern.