JVC KD-S711R - Manual (Page 19)

19
ENGLISH
Setting the clock
You can also set the clock system either 24 hours
or 12 hours.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 20.)
2
Set the hour.
1 Select “CLOCK H” if not shown on the
display.
2 Adjust the hour.
3
Set the minute.
1 Select “CLOCK M.”
2 Adjust the minute.
4
Set the clock system.
1 Select “24H/12H.”
2 Select “24H” or “12H.”
5
Finish the setting.
To check the current clock time while the unit
is turned off, press DISP (display).
The power turns on, the clock time is shown for
5 seconds, then the power turns off.
Changing the general settings
(PSM)
You can change the items listed on the next page
by using the PSM (Preferred Setting Mode) control.
Basic Procedure
1
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 20.)
2
Select the PSM item you want to
adjust. (See page 20.)
3
Adjust the PSM item selected above.
4
Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
5
Finish the setting.
OTHER MAIN FUNCTIONS
2 1
1 2
1 2
EN19-22.KD-S811/713/711R[E]-1 07/12/2000, 05:17 PM 19