Jensen JIMS-260I - Manual (Page 16)

15
Programmed CD Playback
The CD player can be programmed to play any sequence of up to 20 tracks. In
CD mode,
1. Load a compact disc into the CD compartment.
2. After load the disc, press the STOP button before starting the programming.
3. Press PROG button, “MEM” “01:--“ indicates and flashes on the display for 30
seconds.
4. Press the or button to select the desired track to be programmed.
5. Press PROG button again to save the selected track. The programmed track
number “02 --” indicates on the display.
6. Press the or button to select the next desired track to be
programmed.
7. Press the PROG button to save the selected track.
8. Repeat steps 6-7 to program up to 20 tracks.
9. Press the
button to play according to the programmed track when
programming is completed.
Clear Program (Resume Normal Playback)
Press STOP button twice in the program mode, or release the CD door, or change
to another mode to clear the programmed tracks.
SLEEP TIMER
The sleep timer allows you to turn the unit off after a designated time is reached.
1.) To activate the sleep timer, turn the unit on and either load a CD, dock your
iPod/iPhone or tune to the desired radio station.
2.) Tap the SLEEP button and the SLEEP icon appears on the display.
3). Repeatedly tap the SLEEP button to select a sleep time. The unit will turn off
after 10, 20, 30, 40, 50, 60, 70, 80 or 90 minutes. Wait 5 seconds after your
selection for the unit to confirm the selection, the unit will play for the selected
length of time then automatically turn off.
4.) To cancel the sleep timer, press the SLEEP buttons until timer shows “OFF”,
the “SLEEP” indicator will disappear from the display after 5 seconds.
5.) To turn the unit off before the selected length of time, press the POWER
button at any time.
WAKE TIMER OPERATIONS
Setting the wake timer
When the unit is in standby mode,
1.) Press and hold the
TIMER
button until TIMER icon appears and the hour
digit(s) flashes.
2.) Press the or buttons to set the hour.
3). Press the TIMER button to confirm, the minute digits flash to prompt for input.
4). Press the
or buttons to set the minutes.