Preset eq (remote control only), Mute button (by remote control), Auxiliary input – Jensen JIMS-260I User Manual

Page 17

Advertising
background image

5).

Press the TIMER button to confirm, wake up

source

flashing. Press the

or

button to select a source you want to wake to

.

6). Press the TIMER button to confirm, Press the

or

buttons to set the

wake volume level.

7). Press TIMER button to confirm,

Note: When “Wake to Radio” is selected, make sure the radio station you want to

wake to is tuned.

If “Wake to iPod” or “Wake to CD” is selected but an iPod

/ iPhone is not docked or CD is not loaded, the alarm source will be
redirected to the radio automatically when the wake time is reached.

8.) If you want to switch off the wake timer, tap the

TIMER

button and the

TIMER

icon disappears from the display.

9.)

When the wake time is reached, the selected source, radio, CD or iPod/iPhone

will begin to play. The wake timer continues to sound for 60 minutes if no
button is pressed and the unit will reset itself for the following day.

10.) To stop the wake timer after the preset time is reached and the source begins

to play, press either the

POWER button

or the

TIMER button once.

PRESET EQ (REMOTE CONTROL ONLY)

This unit provides 4 different EQ modes to enhance your listening experience.

You can select the desired effect by pressing the “EQ” button on remote control

repeatedly at following sequence:

Mute Button (By Remote Control)

- Press the MUTE button on remote control to mute the sound output from

speaker temporarily, MUTE icon will appear on display and flashing.

- Press the MUTE button again to resume to normal speaker playback.

AUXILIARY INPUT

This unit provides an auxiliary audio signal input jack for connecting external
a

udio devices like MP3 players, CD players and older, non-dockable iPods

(except iPod shuffle 3

rd

gen) and listen to your external source through the

speakers of this system.

1. Use an audio cable (not included) with one 3.5 mm stereo plug on each end of

the cable.

2. Plug one end into the Aux-in jack on the main unit and the other end of the

cable into the Line-out Jack or Headphone Jack of your external audio device.

3. Turn on the external audio device.

16

Off

ROCK

CLASSIC

JAZZ

POP

Advertising